|
|
Extruded Profiles
• Products • Extruded Profiles
|
| For the excellent quality Extruded Profiles, Rane Elastomer Processors is the perfect destination for you. The Extruded Rubber Profiles that we supply in the national as well as international markets are manufactured from the quality rubber fabrics that make them highly durable as well as long lasting in nature. Our range of extrude profiles are known for their good elasticity and resistance to wear and tear. They are tested on different parameters before we supply them in the market. Apart from that, we are one of the major EPDM Extruded Profiles Exporters from India.
Technical Information
Ranelast Extruded Rubber Sleevings
Ranelast Extruded Rubber Sleevings are Used in Electrical/ Electronic Industries for Insulation/ Covering /sheath / Conduit/armour of Leads / Cords / Cables / Conductors. They are Ideal for Use as Insulation On Wire for Fixtures and Appliances Wire Insulation.
Pane Elastomer Processors have indigenously developed successfully Rubber Silicone, Neoprene and Nitrile Sleeving from PVC, Viton Rubber similar to Hellaramann Helsyn’type for various critical applications. Ranelast is backed by three & a half decades of in the most rigorous electrical applications experience in extruding rubber products of various shapes and sizes. This import substitution is the result of incessant efforts of engineers, diemakers and rubber technologists.
Material
The sleevings are made from Silicone Rubber/ Neopreneo Nitrile PVC, Viton to suit customer’s requirements as per applications.
The properties of Neoprene Sleeving are as follows:
- Good Mechanical Properties
- Temp. range long term 50C to 950C
- Resistance to abrasion : Max.
- Intermittent. 1050C
- Moderate resistance to oil
- Good Resistance to weathering
- Minimum Insulation resistance Megaohmes : Dry 3x103 Damp 0.5x10'
- Self Extinguishing
The properties of Nitrile Pvc Sleevings are as follows :
- Good Mechanical properties
- Temp range long term :-600C to 1050C
- Excellent resistance to mineral & vegetable oil.
- Resist Solvents
- Max. Intermittenttemp. :1200C
- Minimum insulation resistance megaohmes: Dry 1x10' Damp 25 x 102 Excellent Ozone Resistance.
Silicone sleevings are of three grades :
Electrical grade.
Medical grade.
Food processing grade.
Silicone Sleevings for Electrical Insulation
Ranelast Silicone Sleeving Has Inherent dielectric strength allied with resistance to high temperatures, high voltage ionisation, arcing, ultra violet light and ozone plus carona resistance violet light and ozone plus carona resistance in the most rigorous electrical applications including moisture laden conditions. It will continue to insulate even in severe vibratory conditions, after reduction to silicone dioxide ash by direct flame contact.
The Silicone sleevings are manufactured in Transparent or Opaque versions. They are available in any diameter and wall thickness, any length &any colour.
Manufacturing Sleeving as Small as 0.20 Mm Wall Thickness is Rane’s Forte. The Sleeving are subject to strictest quality control procedure right from the stage of raw material, formulation, compounding & mixing to extruding finishing and physical measurement. They are rigorously tested to the most punishing requirements subject to ardorous duties as per standard B. S 2848 Type 5 & B. S G.I 98 Type 4 When carefully compounded and extruded, it gives following excellent properties.
Resistance to steam ageing, power factor, permittvity, Electrolytic Corrossion. Smooth, Free from bubbles, pinholes and creases in appearance. Low space factor, long life, no cracking after bending, withstand 48 hours at 1800C without cracking Withstand Low temp upto 650C without cracking and elongation 240% to 280% observed for 1.00 mm dia & 330% to 360% for 12 mm diaRate of burning satisfactory. Volatile content-satisfactory.
Mould Growth : No mould growth visible to eyesight.
Voltage Proofing : At room temp, in air for 1 mm dia with stand 7 KV RMS for 1 minute (At 1800C 1mm dia withstands 4.9 KV RMS for 1 minute) At room temp. in air for 12mm dia withstands 10 KVRMSfor 1 minute (At 1800C for 12mmdia withstands 7 KVRMSfor 1 minute)
Insulation Resistance : Electrical Insulation 500 volts are insulated by a thickness of 1 mill. At room temperature. 1mm dia sleeving : 50 x 106 to 200 x106 Megaohms, 12mm dia 5x106to 50x106Megaohms.
After accelerated damp heat treatment
1mmdia 5 x 106 to 50 x 106 Megaohms.
12mmdia 2 x 106 to 5 x 106 Megaohms.
5/64" insulation on 20, gauge wire hot air vulcanised
insulation resistance: 20,000 ohms per 1000 feet, After 24 hours Immersion 10,000 ohms per 1000 feet, Electric Strength: 18 KVAC.
Medical Grade Sleevings
Sleeving & Tubing : Manufactured under approved cleanroom conditions, Ranelast silicone sleevings are non-toxic and completely without physiological side-effects making it ideal for stringent medical requirement, Its dimensional accuracy gives precise metering and its translucant formation allows the flow to be observed. Rubber pumps in renal core and major cardiovascular surgery produced under special clean room conditions. Higher degree of translucence & freedom from descotouration enable the fluid content to be seen more clearly.
Silicone Sleevings for Food Processing
Ranelast Silicone sleevings do not transfer anytaste of smell to food mixture, neither do they absorb water or constituent liquids. Its smooth surface gives a low coefficient of friction enhancing flow characteristics and simplifying cleaning since even at sterilising temperatures upto 2000 C. non stick property is maintained. It easily complies with the strict hygiene requirements of the food processing industry.
|
|
| | |
|
|
PRODUCTS
